Disclaimer: Actual product colors may vary slightly from the images shown due to different monitor settings and lighting conditions during photo shoots.
Treated round top picket pales in 22mm x 75mm are a traditional fencing timber used to create classic picket-style garden boundaries. Pressure treated for outdoor use, each pale features a rounded top profile and a sawn finish that accepts paint or stain readily. Available in 900mm (3ft) and 1200mm (4ft) lengths.
Specifications
Material
Redwood (softwood)
Treatment
Pressure treated preservative
Finish
Sawn
Nominal Size
22mm x 75mm
Profile
Round top
Lengths
900mm / 3ft, 1200mm / 4ft
Use
External picket fencing and garden boundaries
What it's used for
Front garden picket fencing along pathways and driveways
Low-level decorative boundaries around flower beds and lawns
Replacement pales for existing picket fence panels
Children's play area enclosures and cottage-style garden features
Fitting and handling
Fix pales vertically to horizontal fence rails, leaving an equal gap between each one for a traditional picket appearance. Before installation, store the timber flat and off the ground in a dry, ventilated area to allow it to acclimatise to site conditions. Any cut ends should be treated with a brush-on end-grain preservative immediately after cutting to maintain protection against moisture ingress.
FAQ
Do these picket pales need treating before use?
They are supplied pressure treated, so no additional preservative is needed on the uncut surfaces. However, if you trim any pale to length on site, apply a suitable end-grain wood preservative to the cut face before fitting to prevent moisture uptake at that point.
Can I paint or stain these pales?
Yes. The sawn finish provides good surface adhesion for exterior wood paints and stains. Allow any surface moisture to dry fully after delivery before applying a finish, and use a product rated for exterior softwood for the best durability.
What spacing should I use between picket pales?
A gap equal to the width of the pale itself, roughly 75mm, is a common starting point for a traditional look. Spacing can be adjusted to suit the overall panel width and your preferred appearance, but consistent gaps give the neatest result.
Complete your fencing project with matching fence rails and posts, also available from Nottage Timber Merchants. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local areas.