Product Overview
Products in Wet Room Tanking
Safety Data Sheet is Available
Aquaseal Waterproof Tanking Membrane is a ready to use liquid waterproofing compound that is applied in a 2 coat system by brush. It provides a permanently flexible watertight membrane on floors and walls prior to tiling in shower areas, wet rooms and wet zones and other areas subject to water exposure such as balconies and partially covered external areas. Non-hazardous and solvent free. It is quick drying and tiling can commence after 12 hours.
The Aquaseal Waterproof Tanking Membrane can be used on its own in many applications where a flexible watertight membrane is required, or in conjunction with Aquaseal Tanking Primer, Aquaseal Tanking Tape and Aquaseal Tanking Drain Mat, as part of the Aquaseal Wet Room System, to provide a 100% waterproof membrane to conventional plaster and timber based boards. It can be applied to all common building substrates such as plasterboard, MDF, plywood cementitious boards, blockwork, concrete and speciality wet room boards.
Benefits:
Can be used on most common building surfaces
Ready to use, no diluting necessary
Easy to apply by brush
Non-hazardous, solvent free
Can be tiled over after 12 hours
Areas for Use:
For showers, wet rooms and wet zones in bathrooms
As a Tanking membrane as part of the Aquaseal Wet Room System
As a Primer on most common building surfaces
Balconies and partially covered external areas
Limitations:
Do not apply below 10C
Do not apply externally when rain is imminent (within 6 hours)
Do not apply second coat until the first is dry
Damp or humid conditions will significantly extend drying time
It is the users responsibility to determine suitability for use. If in doubt contact Everbuild Technical Services for advice
Size: 5L Tub
